www.fastmarinamagazine.com

Just managed to get a replacement Thermostat cover (the one with the nylon plug). Twas sold as being from an All Aggro on Evil Bay, but is the same part so a result!

Bit late in posting but..... Got Kermit back from the Mechanic on Saturday. As mentioned in the 1300 A Series Engine thread, have had the head skimmed, new Exhaust valves fitted and seats recut. Took Kermit down to Felixstowe on Sunday as I was marshalling the Commercials, so I thought I would stret...

First outing out after a head skim and new Exhaust valves. Hoping the cooling problems have been sorted. Wasn't in the run as I was Marshalling the Commercial vehicles and Buses.
Glad you like Kermit!

Last weekend got the Head back from Coltech at Hollesley. Sometime in the past the engine has been cooked so they have skimmed the face, recut the seats and ordered in new Exhaust valves. Discussed with them the need to fit hardened inserts and, unless I am intending pushing engine hard or driving h...

I had a problem with my Indicators. Did all the checks, Checked the fuse visually no probs, the flasher units worked, checked the column stalk switches and the wiring - still no dice. Decided to check the fuse again - this time with a multimeter. Yep, you guessed it, broken fuse at the end not visib...

Did the indicators work prior to fitting the Stereo? If yes, my suggestion is go back to that point and forget about fitting the stereo that way. Me: I am no auto electrician and like to keep things "simple". When I have fitted auxiliaries in the past I run a new Positive line off the Batt...

Thanks Josh for the info. I am guessing that the block is original but won't know until I check numbers. Main worry is that the Piston(s) is wrongly fitted on the Con Rod so will need to extract the Gudgeon Pin. How easy and are the Extraction Tools easily available? Best scenario is that the whole ...

Last week decided to get the problem of my oil and water loss sorted. A local mechanic did a pressure test and identified low compression in bores, due to leakage at Exhaust Valves. Rings slightly down but not unduly. Head has been removed and as suspected Head Gasket has broken down and Exhaust Val...

The main problem with the rear lights on Mk1s & Mk2s is usually the earthing, as the units earth through their mounting bolts. If there’s much rust the connection will be iffy and lead to spikes in the supply. Try running an earth lead from the car body to the metal rear light unit. Are those t...

As suggested a google search, or yellow pages, should find you a few local Auto Electrical Companies that refurbish Starter Motors, Alternator, Dynamos etc. Alternatively ask a few of your local Auto Factor Shops! I found both my Alternator and Starter Motor were rather tired a couple of years back,...

Took Kermit out for a short run last week and on return pretty close to overheating, just showing red! Checked the water and was very very low. So....now have two problems. Using Oil and Water. Suspected worn valves and piston rings (as compression is down) but am now wondering if Head Gasket is sho...

Noticed couple of weeks ago Temperature rising a tad above normal on Kermit - nothing serious but today decided to investigate. Slight leak around Thermostat cover has meant water level has dropped so decided to cut a new gasket. On removing the cover noticed to branch for the hose badly corroded an...

david painter wrote: ↑Sat Jan 28, 2023 1:13 pm ]That will be fine for a Marina shape and size is important to fit in tray correctly the original British Battery Number is a 038
038 battery.jpg

Capacity45 Ah
CategoriesBatteriesCCA330
Height200 mm
Hold DownB12
Length239 mm
Terminals1/
1UK Reference No38

Dave

Brilliant. Thanks muchly

Stop Start systems use Absorbed Glass Matt (AGM) Batteries rather than Flooded Lead Acid Batteries. The AGM battery is supposed to be more stable for the constant use of starter motor. The cars electronic system has a battery shunt built into the Negative battery lead in most cases this shunt is al...

It looks like time to replace the battery on my 1300 saloon and reading through the comments posted, no one seems to have mentioned the suitability of different types. Obviously Lead Acid are old school but most sites seem to be selling Calcium batteries - which appear to be designed for stop/start ...