Marina and Allegro tandem master brake cylinders
Moderators: ClaytonSpeed, balmy
Marina and Allegro tandem master brake cylinders
Does anyone know if they are interchangeable? They have different girling casting numbers but apparently the same bore. This one is for an allegro, and looks exactly like the one on my '75 Canadian spec car.
-
- Posts: 1320
- Joined: Thu Jun 07, 2007 1:15 pm
- Location: LINCOLNSHIRE
Re: Marina and Allegro tandem master brake cylinders
LoOKs like a dolomite one aswell
- MarinaCoupe
- Posts: 10193
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact:
Re: Marina and Allegro tandem master brake cylinders
The bore is the same, but I believe that the unions are metric on the Allegro (M10 x 1.0) and imperial on the Marina (3/8” UNF). Ask the seller to check this one.
Re: Marina and Allegro tandem master brake cylinders
Chris that looks the same as my one doe it not.
Gary
Gary
- MarinaCoupe
- Posts: 10193
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact:
Re: Marina and Allegro tandem master brake cylinders
No Gary, that’s the same as the one that I sent you which was the wrong one. It doesn’t have the piston extension that sticks into the servo.
Re: Marina and Allegro tandem master brake cylinders
Thought I’d seen it
- MarinaCoupe
- Posts: 10193
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact: