mystery trunnions
Moderators: ClaytonSpeed, balmy
-
- Posts: 97
- Joined: Sun Apr 06, 2014 8:47 pm
- Location: verwood, dorset
- MarinaCoupe
- Posts: 10194
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact:
Re: mystery trunnions
Is there a part number on the boxes? They are not Morris Minor.
Chris
Sent from my iPhone using Tapatalk
Chris
Sent from my iPhone using Tapatalk
-
- Posts: 97
- Joined: Sun Apr 06, 2014 8:47 pm
- Location: verwood, dorset
Re: mystery trunnions
there may be, unfortunately they are in my parents garage, so i cant look now for a little while. i know they arent minor as i have one of those aswell as my marina!
i'll look for the part number next time i have them out
i'll look for the part number next time i have them out
Re: mystery trunnions
They are Marina ones. These are the revised ones produced by BL in 1971 shortly after launch. The original Marina trunnions had the swivel pin hole halfway up the body the same as Minor ones. BL issued these revised trunnions to bring in more negative camber to improve the handling on early 1.8s. They were then redesigned again in late 1971 when the shock absorbers and front uprights were redesigned.
They were presumably only produced for a very short time but they seem relatively common. I have never compared one with a standard later trunnion but I should imagine they will do the same job if you can get them onto a later leg OK.
They were presumably only produced for a very short time but they seem relatively common. I have never compared one with a standard later trunnion but I should imagine they will do the same job if you can get them onto a later leg OK.
Club archivist/chief anorak
1936 Ford Model Y- On loan from the CCLP
1967 Triumph Herald
1971 1.3 DL Coupe (VRU362J)
1971 1.3 SDL Coupe (JGC240K)
1971 1.3 SDL Saloon (OVW292K)
1971 1.8 SDL Coupe (MCU274K)
1980 Ital 1.3 HL (NPB34W)
1936 Ford Model Y- On loan from the CCLP
1967 Triumph Herald
1971 1.3 DL Coupe (VRU362J)
1971 1.3 SDL Coupe (JGC240K)
1971 1.3 SDL Saloon (OVW292K)
1971 1.8 SDL Coupe (MCU274K)
1980 Ital 1.3 HL (NPB34W)
-
- Posts: 97
- Joined: Sun Apr 06, 2014 8:47 pm
- Location: verwood, dorset
Re: mystery trunnions
mystery solved then!
i have a pair of marina uprights loitering in the garage so i'll see if they fit- i suppose they'd be alright on my 1.3 deluxe then?
i have a pair of marina uprights loitering in the garage so i'll see if they fit- i suppose they'd be alright on my 1.3 deluxe then?
- MarinaCoupe
- Posts: 10194
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact:
Re: mystery trunnions
They will help to give that "lovely" early suicide suspension feel as you go straight on at the first sharp corner, the reason that they were changed in the first place. The geometry is different from later trunnions, if you compare them side by side.
Chris
Sent from my iPhone using Tapatalk
Chris
Sent from my iPhone using Tapatalk
Re: mystery trunnions
No Chris, these are the revised ones which BL said would be fitted to all 1.8s after the press complained about the handling (of course they weren't!). The 'suicide suspension' ones had the swivel pin half way up the body, the same position as the Morris Minor had them in.
And before anybody asks the Minor ones aren't the same as early Marina ones, Marinas had a beefier bore and thread.
I have never compared these revised ones with a later trunnion but I suspect the geometry is the same, although as I said before I am not sure they will fit on later suspension legs. Only one way to try!
And before anybody asks the Minor ones aren't the same as early Marina ones, Marinas had a beefier bore and thread.
I have never compared these revised ones with a later trunnion but I suspect the geometry is the same, although as I said before I am not sure they will fit on later suspension legs. Only one way to try!
Club archivist/chief anorak
1936 Ford Model Y- On loan from the CCLP
1967 Triumph Herald
1971 1.3 DL Coupe (VRU362J)
1971 1.3 SDL Coupe (JGC240K)
1971 1.3 SDL Saloon (OVW292K)
1971 1.8 SDL Coupe (MCU274K)
1980 Ital 1.3 HL (NPB34W)
1936 Ford Model Y- On loan from the CCLP
1967 Triumph Herald
1971 1.3 DL Coupe (VRU362J)
1971 1.3 SDL Coupe (JGC240K)
1971 1.3 SDL Saloon (OVW292K)
1971 1.8 SDL Coupe (MCU274K)
1980 Ital 1.3 HL (NPB34W)
Re: mystery trunnions
The underlying problem with trunnions is that they only have 1 grease nipple.
Depending on whether your horizontal pin bushes are more worn than your upright thread or vice versa - the grease will take the easiest path - so one or the other is going to miss out on being lubricated.
Only way to lubricate the trunnion properly is to remove it - fill it with grease - then reassemble it and force grease in every direction.
Don't ask me how I know...
Depending on whether your horizontal pin bushes are more worn than your upright thread or vice versa - the grease will take the easiest path - so one or the other is going to miss out on being lubricated.
Only way to lubricate the trunnion properly is to remove it - fill it with grease - then reassemble it and force grease in every direction.
Don't ask me how I know...