So I noticed when I first put water in PDA last week it was leaking from somewhere near the water pump, but I couldn't see where. Since starting it the leak stopped but it has now come back and I can see it is coming from the hole in the bottom of the water pump, so I assume the seal has failed? I'm not sure though but one of you guys will I'm sure.
My other question is, should I just replace the seal (providing one is available and that is actually the problem), or is it not worth it and seals don't really work on a used pump so I may well fit new?
Cheers guys
Water Pump
Moderators: ClaytonSpeed, balmy
- First-Car as Marina
- Posts: 779
- Joined: Mon Jul 28, 2014 4:21 pm
Water Pump
1976 1.3 DL Coupe - Retired daily after 2.5 years, smashed up, now being fixed (PDA 827R) (Lumpy)
1971 1.3 SDL Saloon - Rotting into the front garden, will resume in 2021 (VGV 616K) (Rusty)
1971 1.3 DL Coupe - MOT'ed and on the road, used as much as possible (REW 5K) (Tigger)
2013 Ford Focus Zetec S - Very economical and a great car in general
1971 1.3 SDL Saloon - Rotting into the front garden, will resume in 2021 (VGV 616K) (Rusty)
1971 1.3 DL Coupe - MOT'ed and on the road, used as much as possible (REW 5K) (Tigger)
2013 Ford Focus Zetec S - Very economical and a great car in general
-
- Posts: 106
- Joined: Mon Jan 13, 2014 12:00 pm
Re: Water Pump
Just fit new, so cheap,not worth Messing about
Sent from my CUBOT_X18_Plus using Tapatalk
Sent from my CUBOT_X18_Plus using Tapatalk
- MarinaCoupe
- Posts: 10197
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
- Contact: