1.8 Gearbox gearstick anti-rattle spring and ball

**Topics directly related to Marinas and Itals**

Moderators: ClaytonSpeed, balmy

martinclan
Posts: 158
Joined: Sat Aug 29, 2020 11:04 am

1.8 Gearbox gearstick anti-rattle spring and ball

Post by martinclan » Tue Jul 23, 2024 1:16 pm

I have two gearsticks. Neither of them have the anti-rattle spring and ball.
Are they really necessary?
Does anyone have dimensions of the same?

Cheers, Robin

User avatar
MarinaCoupe
Posts: 10257
Joined: Thu May 31, 2007 5:26 pm
Location: Bedford
Contact:

Re: 1.8 Gearbox gearstick anti-rattle spring and ball

Post by MarinaCoupe » Wed Jul 24, 2024 9:45 am

Well, they do what they say on the can, if yours doesn’t rattle or vibrate as you drive along then leave them out. They are available new as the gearbox and stick mechanism is shared by the Triumph Spitfire, Dolomite & TR7.

BL re-used an existing spring from the gearbox synchros, into the gearstick shaft.
https://rimmerbros.com/Item--i-106388

The nylon cap is also available.
https://rimmerbros.com/Item--i-22G2286

User avatar
JubileeNut
FMM Supporter
FMM Supporter
Posts: 5221
Joined: Tue Jun 05, 2007 7:14 pm
Location: Worthing, West Sussex, UK

Re: 1.8 Gearbox gearstick anti-rattle spring and ball

Post by JubileeNut » Wed Jul 24, 2024 5:14 pm

I think mine was fitted with anti rattle spring and cup. I Would fit it.
" Pru, Its Kicking off "
1973 Morris Marina TC Jubilee
2013 BMW 328i M Sport F31

martinclan
Posts: 158
Joined: Sat Aug 29, 2020 11:04 am

Re: 1.8 Gearbox gearstick anti-rattle spring and ball

Post by martinclan » Fri Jul 26, 2024 9:26 pm

Thanks Chris. A font of knowledge as usual.

Cheers, Robin

Post Reply