Fast Marina Magazine

Can anyone tell me whether the seats ( front and rear ) are the same between saloons and coupes? Are MK1 seats the same as MK2?

Any info would be good.

Thanks

No !! they're all different between the marks and the models !! :roll:

mk1 front seats will swap but coupe and saloon rear seats are different , coupes are squared off and saloons are rounded !! This goes for the rest of the marks , although they sometimes can be made to fit !!

Dont forget that Coupe front seats tilt forward,saloons dont.

Bugger! Was hoping I could get the HL ones on ebay at the moment for my MK1 TC but they are just not going to fit. Damn.

Thanks guys.

And I think (waits to be corrected) that mk1 seats are bolted to the floor and mk2 are on runners?

You are correct Sam. The Mk1 coupe (early types) were bolted to the floor, the later Mk1.5 types were on runners.

Have a gold star

woohoo! *checks off seats on her things to learn about Marinas checklist*

Seats, doors and grills, get me

You are right about front seats, but back seats are exactly the same, at least on the 1974 models Austin Marina

Rear seat squab is different, in as much as it curves, whereas the coupe one is straight. But if you fancy the comfort of decent MK3 seating, get them & simply strip off the covers, foams, etc, & fit them them to your original seat frames. If you have a early type seat, piece of cake, straight on, later types with the little lever on the side to flip the backrest forward are a little more complicated, but it can be done never the less.
I'll get some pictures on next week of some recaro rover seats I've modified to fit my mates pickup, now they are clever!

Best wishes

Brian