Fast Marina Magazine

Does anybody know if the marina 1275 exhaust flange is the same size as a Morris minor flange , there more available if so or are they different sizes thanks for your help

Do you mean the clamp that holds the exhaust to the manifold?

If it is then the part number is: gex7284

I may have one in stock, but will need to check tomorrow for you.

The reason i ask my exhaust manifold does not have a servo pipe so is this an early manifold, or maybe it is not a marina manifold but a Austin manifold maybe

The Marina 1275 has a take off for the servo on the manifold. Part number: 12G3538 - eBay say it is the same as a mini: https://www.ebay.co.uk/itm/194208870696

Thanks for your help, did all marinas have a brake servo fitted then

Not all no. Certainly not in the early years. But the manifold would have been the same on cars with and without.

I have a number on the casting 12g2395

What year is the car? You could be right and it is an early manifold. You can use a later one and just block off the servo tap.

My original one was broke and this one is a replacement which is in good condition, would any size exhaust pipe fit like a Morris Minor, or does it have to be a Marina which are harder to come by. Thanks for your help

Minor exhausts are a smaller diameter as they are only 1100cc - Marina exhausts can be got hold of or even made brand new.

http://exhaustsuk.com/aboutus.htm

Thanks for your help