Fast Marina Magazine

Hi all

I've got a Marina Haynes Manual for all 1098 and 1275 models from 71 to 80.

It says in it that the marina uses 6 and a 1/2 pints of Castrol GTX Multigrade, but doesn't specify what particular grade, E.G 10W/40.

Apologies if this is a daft question, im still learning lol

Same with the Axle and Gearbox Oil, as recommended by BL, Hypoy B90 doesn't seem to be made anymore...

Engine i use Morris oils 10w/40 mineral oil. Manual gearbox i used a GL4 75w/90 in the axle used some 90w/140 SLX limited slip oil because thats what I had thing gearbox and axle were ether Castrol or Euro car parts Triple X brand i buy both regularly for work. After changing the gearbox oil andm y trip to France the second gear has stopped crunching, must have cleaned up a polished bulkring
Dave

I use Millers Classic Pistoneeze 20w-50 engine oil mainly because it's good quality and importantly it's a good old family owned Yorkshire company!
Comma EP80w-90 GL4 in the gearbox and diff. Wilko sells the Comma gear oil.

Millers 20W50 is my usual choice as well.

PHUQ wrote: Mon Oct 11, 2021 12:32 pm Millers 20W50 is my usual choice as well.

Shame they've switched to the tins with the plastic handle though

ScreamingLordStokes wrote: Sun Oct 10, 2021 6:16 pm I use Millers Classic Pistoneeze 20w-50 engine oil mainly because it's good quality and importantly it's a good old family owned Yorkshire company!
Comma EP80w-90 GL4 in the gearbox and diff. Wilko sells the Comma gear oil.

That looks like a nice tin tbh, and I'm more than happy to support a Yorkshire business rather than a Multinational like FUCHS.

Cool, they do a full range of classic oils so you could also get your gear oil from the Millers range too.

Can’t beat anything from Yorkshire

ScreamingLordStokes wrote:Cool, they do a full range of classic oils so you could also get your gear oil from the Millers range too.

I'll set up an account on their website then.

Sent from my SM-N910F using Tapatalk

balmy wrote:Can’t beat anything from Yorkshire

Except the weather!

Sent from my SM-N910F using Tapatalk

Opie Oils sell the Pistoneeze 20-50 for a good price on eBay with free 2 day postage.
Or if you're in the Chesterfield area Steve Mckie sells it at his MG restoration garage, just off the bypass. It's a bit more expensive from there though.

ScreamingLordStokes wrote:Opie Oils sell the Pistoneeze 20-50 for a good price on eBay with free 2 day postage.
Or if you're in the Chesterfield area Steve Mckie sells it at his MG restoration garage, just off the bypass. It's a bit more expensive from there though.

Ah I didn't know that was there, I'll take a look!

Sent from my SM-N910F using Tapatalk

Yes, Steve is a good guy and I like to support him, even though he's a little more expensive than you might find online. Of course being an MG specialist he knows the A and B series engines inside out too.

Just decent quality mineral 20/50.
Next change will include slik50 just as an experiment.
Engine was rebuilt with new pistons roughly 5000m ago and seems to be using less oil than at first. I've some plans to reinstate the original TC filter set up with further refurbishment on the cards just to see how it goes as it has always run a bit rich and hot.
T
T

Formula 1 recycled mineral as a gap filler in all my ancient wonders like its still 1990!!