Page 1 of 1

Fitting door mirrors!

Posted: Tue Aug 23, 2022 10:12 am
by RetroMat
I'm in the process of finishing the restoration of my works Austin 7cwt van. I'm looking to fit some door mirrors. The van never had them from new but I would like the van to be a little more usable
I've purchased a pair of these:
https://www.angclassiccarparts.co.uk/pr ... legro-maxi
My question is where should they go! Before I start drilling Did BL ever release a guide where on the door they should be fitted? I've been looking at various pictures of marinas and the door mirrors seem to move around the area of the 1/4 light.
IMG_20220812_165147.thumb.jpg.0a3b81153c5e0cbf119dcc392e8d19f3.jpg

Re: Fitting door mirrors!

Posted: Fri Aug 26, 2022 1:12 am
by locost_bryan
This appears to be an official Mk2 publicity photo, showing what I assume to be the official factory position for your type of door mirror.
images.jpeg-1.jpg

Re: Fitting door mirrors!

Posted: Sun Sep 18, 2022 7:41 am
by RetroMat
IMG_20220825_113342.jpg
Thanks! Well using various images I marked a position and went for it!

Re: Fitting door mirrors!

Posted: Mon Sep 19, 2022 1:06 am
by locost_bryan
I had a similar type of mirror on a Marina back in the 80s, and the little grub screws that held the "pedestal" to the door mount kept vibrating loose, and needed a dab of Loctite. Not sure if your mirrors use the same system?

Image