Page 1 of 1
Wheel Stud
Posted: Fri Aug 24, 2007 4:23 pm
by Bomber
Hi Guys,
does anyone know where I can get a wheel stud and nut for the front of my 1981 Ital please??
May be someone has an odd hub lying around.
Cheers everyone, great forum. Read with great interest.
Is there anything you guys don't know about our treasured classics??
Posted: Fri Aug 24, 2007 9:10 pm
by JIM73
Ive got an old hub if that,ll help !!! 8)
Posted: Sat Aug 25, 2007 4:49 pm
by Bomber
Thanks Jim,
I'll let you know...
Posted: Sat Aug 25, 2007 6:41 pm
by madmart
if you want to upgrade your studs,
pop down the local scrappy for some rover metro 100 ones
there m12 x 1.5 thread size and fit strait into the marina hubs,
the front and rear studs are diffrent lengths too as the metro has 1 inch spacers built into the drums on the rear.
mgf alloy nuts fit on them as well as any late ford steel nuts which suit a standard marina wheel
Posted: Sat Aug 25, 2007 6:45 pm
by Bomber
Thanks Madmart,
does this apply to Ital as well please??
Cheers
Posted: Sun Aug 26, 2007 2:37 am
by madmart
yes i believe the ital used the same hubs as the marina,
i forgot to mention if your using the longer rear studs the thread does not go all the way to the base of the stud so there only suitable for alloys or spacers