Fast Marina Magazine

I bought a diff pinion oil seal from Earlpart £6 and 2 back brake cylinders from Dingbro.£11. Not too expensive and have had a new petrol tank fitted.
Took the Estate for MOT yesterday and it passed with no advisories.

More cavity wax, 'Rejel' brand. It's the same company as Dinitrol, just their new brandname, also a bit cheaper than the Dinitrol brand!

Fuel line lol

Windscreen sealant

another Marina to keep it company

Steering rack bush courtesy of MarinaCoupe.

Did it arrive this morning?







Chris
www.marinacoupe.co.uk

Morning?!

Out here in the sticks post comes in the afternoon! And yes it has just arrived

5ltr can of Comma/Halfords 20w50 oil (bought with friends trade discount ) and a mann oil filter for my 3k oil change.

also just got a set of Brown&Gammon 1.625:1 roller rockers and stronger+lighter tubular pushrods and followers. Just need to find some effort to fit them along with the ported, flowed head that I aquired.

A pair of leaf springs from the very helpful folk at Midland Road Springs in Coleshill. Had a few days off work so I thought I'd pop up the M42 and collect them, told the Mrs we were going for an afternoon out in the West Midlands!

Set of Spax dampers and Supaflex polybrushes also on order, lucky marina, poor old credit card!

TC Torryn wrote:5ltr can of Comma/Halfords 20w50 oil (bought with friends trade discount ) and a mann oil filter for my 3k oil change.

also just got a set of Brown&Gammon 1.625:1 roller rockers and stronger+lighter tubular pushrods and followers. Just need to find some effort to fit them along with the ported, flowed head that I aquired.

Hi Torryn, what part number is your Mann filter? i bought one from my local Andrew Page factors for my B-series but when i looked on the receipt it said it was for BL A-series.

Top and bottom engine gasket kits in preparation for the rebuild for the pickup engine. New timing chain, tensioner, water pump, oil filter.

I won't know whether to buy standard or + 'x' thou big ends until its apart and I can check the big end journals.







Chris
www.marinacoupe.co.uk

Hi Torryn, what part number is your Mann filter? i bought one from my local Andrew Page factors for my B-series but when i looked on the receipt it said it was for BL A-series.

Hi Tony, the mann oil filter i have fitted has this part number: W916/1. mine has the upward facing oil filter mount. hope that helps

Ah, mine has the downwards facing mounting, but thanks anyway Torryn. Think i'll stick with Unipart or Halfords filters, i know where i am with them.

Hi all in Marina land.
I spent $1700.00 on Saturday,this is what I got for my money.
recond 6 cyl eng ,modified head big valves & ported,complete 2" triple carb jag setup,lightened fly wheel,new clutch & pressure plate,4 speed gearbox with cortina selector,various spare engines,gaskets,waterpumps.
Not bad hey ?
They also threw in a Triumph mk1 GT6 with all the parts to fix.The kids want this one for there first car.