Fast Marina Magazine

Online searches and my Haynes manual both say 8inch but they don't fit, they're too small. Anyone have an idea?

Is this for a 10cwt van or pickup? They used different running gear to the saloons/coupes estates/7cwt vans.

The saloons/coupes estates/7cwt vans did use 8” drums.

It's a pick up

Can you see a Hub nut on end of half shaft (7 cwt axle) on just a flat disc ( 10 cwt axle)
Dave

I'll have a look later on and post a pic

Sure all pick ups are 10cwt originally

9" on the pickup and 10cwt van

REAR BRAKE SHOES ; MARINA PICK-UP & 10 CWT VAN '75-'80, ITAL 575 10CWT VAN '80-'84
GBS610 The shoe size is 228.6mm x 45mm which are suitable for 9" diameter drums.
https://www.angclassiccarparts.co.uk/?i=88947

REAR BRAKE SHOES ; MARINA 1300, 1700, 1800, ITAL (MANUALLY ADJUSTED BRAKES)
GBS815 These are the 1.5" wide shoes for use with the self adjusting type brakes. SIZE : 203.2mm x 38mm.
https://www.angclassiccarparts.co.uk/?i=95515

REAR BRAKE SHOES ; MARINA 1300 '71-'74, MARINA 1800 '71-'72 (SELF ADJUSTING BRAKES)
GBS746 These are the 1.5" wide shoes for use with the self adjusting type brakes. SIZE : 203.2mm x 38mm.
https://www.angclassiccarparts.co.uk/?i=53163

Yes - all pickups are 10cwt rated and use a heavy duty axle that is different from the saloon etc. the axle is the same as the early MGB Banjo axle so that’s where you need to look.

https://www.scparts.co.uk/sc_en/british ... 87024.html

Brilliant. Thank you very much