Page 1 of 2
Ben's got shiney nuts!!
Posted: Thu Nov 15, 2007 10:59 pm
by billytits
Thought you might wanna have a look at ben's new nuts
Other shiney bits I've made
Posted: Thu Nov 15, 2007 11:01 pm
by billytits
Posted: Thu Nov 15, 2007 11:04 pm
by JIM73
Very shiney Trev !!

Posted: Fri Nov 16, 2007 9:55 am
by ClaytonSpeed
lovely!!! I look forward to fitting these! Thanks Trev!
Posted: Fri Nov 16, 2007 11:00 am
by ~Sam~
don't suppose you have another 16 mine are all knackered

Posted: Fri Nov 16, 2007 10:23 pm
by billytits
Sam what wheels are you running as i will need to make a drawing so that i can reproduce them accuratly
Posted: Fri Nov 16, 2007 10:25 pm
by JIM73
Standard TC nuts !! like the ones you were making me 2 years ago !! :roll:
Posted: Fri Nov 16, 2007 10:35 pm
by billytits
Looks like I've got a big batch to make then! Don't get gobby or you'll get nothing ginger pink thing!!
Posted: Fri Nov 16, 2007 11:15 pm
by JubileeNut
Trev, are those wheel nuts stainless?
Only I need ones like those but not same as standard TC as the Jubilee has a centre cap and a flat plastic washer on the wheel nut!!
Not easy to find these ones, well so far!
Cheers,
Paul
Posted: Sat Nov 17, 2007 10:05 am
by Gee tc
HI ,
Paul......
If the jubilee uses Triumph centre caps, Will their nuts do?
(not that I have a clue how they look!)
Tony
Posted: Sat Nov 17, 2007 3:54 pm
by JubileeNut
Hi Tony, like the avatar / picture
Spitfire or GT6 wheel nuts are the same!
they have a plastic washer on the nut to protect the centre cap
I have some spare ones I bought but they are second hand and not in great condition.
I think I can get new ones from rimmer bros but they cost lots!
Still no news on Harleys place yet! I think she must be snowed under with bits to sort or they are dragging their heels!
Hope you car is going well, mine is stripped now.
Cheers,
paul.
Posted: Sat Nov 17, 2007 11:13 pm
by billytits
hi paul
stick a pici on and i will let you know if i can sort something out and yes they are stainless i think ive got a bit of a fetish for the stuff if i can make them we will talk about cost later on but im sertainly not rimmers
cheers
Trev
Posted: Sun Nov 18, 2007 11:14 am
by JubileeNut
Hi Trev,
I will get a picture up here -
This was off ebay as I have no access to my pc at mow, but this is what they look like!
Posted: Mon Nov 19, 2007 9:57 am
by billytits
hi paul
they should be no problem will need some sizes i presume the nuts are the same as a tc nut but are turned down to accomodate the plastic washer if you let me know the overall length of the nut and the diameter and length of the turned section i will make a drawing and we can go from there also is it 17mm or 19mm hex as this dose vary sometimes
cheers
Trev
Posted: Fri Nov 23, 2007 10:37 pm
by billytits
more shiney bits that are available
