Page 1 of 1

Marina parts

Posted: Wed Sep 06, 2017 3:49 pm
by GJ2
Ok where can I buy the following please for a LHD 1976 1.3

Exhaust front down pipe
Tie rod bushes
Jacking point
Brake Master cylinder

Any help much appreciated as have searched eBay and nothing.
Cheers
Gary

Re: Marina parts

Posted: Wed Sep 06, 2017 5:32 pm
by lock1506
Hi Gary, the club do very good jacking points, search Superflex for the tie rod bushes, I might have a front down pipe thats cut off under the floor and not the full piece with the silencer in. Brake master cylinders do come up on ebay especially when you put a wanted ad on here! lol.
Chris.

Re: Marina parts

Posted: Wed Sep 06, 2017 5:53 pm
by Morris McKinnon
Chris on here (MarinaCoupe) does refurb Girling 75 masters on exchange. I have a spare here if you get stuck.

Re: Marina parts

Posted: Wed Sep 06, 2017 6:40 pm
by GJ2
Cheers Chris,have joined the club but just waiting for membership details and will order a jacking point but doubt they will have one in stock for me. Super flex it is then.The down pipe goes from the manifold and joins 3/4 along the car I think as it has a stainless one from there so would yours be ok ?.

Cheers Gareth,need one ASAP so I can get it in for mot then I can register it in the Uk will yours or (Marina coupe) ones be the same as mine as its a LHD is there any difference.

Re: Marina parts

Posted: Wed Sep 06, 2017 6:49 pm
by Morris McKinnon
oh yes, I forgot you'rs is LHD mk2! You may have the tandem set up fitted which is different.

Re: Marina parts

Posted: Wed Sep 06, 2017 7:04 pm
by GJ2
Here you go
image.jpeg

Re: Marina parts

Posted: Wed Sep 06, 2017 7:07 pm
by Morris McKinnon
Yeah, tandem brake system. I think they used Lockheed masters.

Re: Marina parts

Posted: Wed Sep 06, 2017 7:50 pm
by First-Car as Marina
I think the one I have is similar, not sure if it's the same as I think it came from an ital. Think it was all ok when removed from the car as it was used on a banger car but I'm unsure of its actual condition, repair seals may be available but it could be perfectly fine. Let me know if that can help, I can do some more pictures if you need me too.
IMG_20170614_182059.jpg
Alex

Re: Marina parts

Posted: Wed Sep 06, 2017 8:46 pm
by mickthefitter
I've been thinking about possible comparability with Triumph parts, since my own rhd 1800 allegedly has a TR6 servo fitted. I've just been on canleyclassics.com and they list two types of tandem master cylinder for the Spitfire 1500. I can't tell you if either are like yours but it might be worth investigating, especially if you can make out some part numbers on your old one.

Re: Marina parts

Posted: Wed Sep 06, 2017 9:48 pm
by GJ2
Hi first car will keep you in mind many thanks.

Re: Marina parts

Posted: Wed Sep 06, 2017 9:49 pm
by GJ2
Yes will try and see if any numbers can be seen.