parts

**Topics directly related to Marinas and Itals**

Moderators: ClaytonSpeed, balmy

Marina575
Posts: 4
Joined: Mon Dec 28, 2015 9:59 am

parts

Post by Marina575 » Sat Jan 02, 2016 10:23 pm

Hi was wondering if anyone knew a good place/website in NZ to get rear quarter bumpers for a "79 Marina 575 , a window seal for wind down windows and all 6 window seals for the back of the van.

User avatar
locost_bryan
Posts: 3096
Joined: Fri May 22, 2009 2:43 am
Location: Auckland, New Zealand

Re: parts

Post by locost_bryan » Mon Jan 04, 2016 9:19 am

Marina575 wrote:a window seal for wind down windows
For a Mk3 door with quarterlights, or did the '79 575 not have opening quarterlights like the Mk3 "1700" saloon? Don't know about new, but I think I have a second hand one in my box of bits (I'm in Swanson, Auckland). You're more than welcome to come over and have a look through my "stash" :thumbup: . Kilroy most likely has some in his stash of Mk3 parts down in Christchurch.

Not aware of any online resource, but basisnz would be a good place to start for rubbers (don't list Marina, but have other BMC models).
Bryan
Auckland NZ

1972 Morris Marina 1750 TC Coupe "Ozzy"

Marina575
Posts: 4
Joined: Mon Dec 28, 2015 9:59 am

Re: parts

Post by Marina575 » Tue Jan 05, 2016 9:03 am

Thanks Bryan, uploaded a picture of what the bumpers should look like, might give basis a call tomorrow and see if they can give me any info on what they got.

User avatar
Kilroy
Posts: 1796
Joined: Wed Jun 06, 2007 1:50 am
Location: New Brighton, New Zealand
Contact:

Re: parts

Post by Kilroy » Wed Jan 06, 2016 5:13 am

I bought a pair of front door outer glass seals from Earlpart.
They seem ok quality and are supplied in the longest length as fits a non-quarterlight door.
They can be easily shortened.
I would think that Basis could supply a generic rubber to use for the rear side windows which were all fitted locally to begin with.
I would hope they might also have a suitable profile for the rear door glass although I have not attempted to get some yet.

User avatar
locost_bryan
Posts: 3096
Joined: Fri May 22, 2009 2:43 am
Location: Auckland, New Zealand

Re: parts

Post by locost_bryan » Wed Jan 06, 2016 9:46 pm

Kilroy wrote:I bought a pair of front door outer glass seals from Earlpart.
They seem ok quality and are supplied in the longest length as fits a non-quarterlight door.
They can be easily shortened.
I would think that Basis could supply a generic rubber to use for the rear side windows which were all fitted locally to begin with.
I would hope they might also have a suitable profile for the rear door glass although I have not attempted to get some yet.
Earlpart's Jan 2016 Marina/Ital catalogue http://earlpart.co.uk/catalogue%20marina.pdf
Bryan
Auckland NZ

1972 Morris Marina 1750 TC Coupe "Ozzy"

Post Reply