**Topics directly related to Marinas and Itals**
Moderators: ClaytonSpeed, balmy
-
locost_bryan
- Posts: 3096
- Joined: Fri May 22, 2009 2:43 am
- Location: Auckland, New Zealand
Post
by locost_bryan » Tue Oct 23, 2012 11:29 pm
Found this interesting photo on Flickr. Haven't seen it on the group before.
Details
here.
This is a standard Marina Coupe which has Been modified to become a hatchback, by the addition of a tailgate from a Mark 3 Capri. I forgot to read the leaflet on the car explaining about the modification, but I think it was a professional job, available to order. Both the car and the tailgate appear not to have been hacked about too much in order to fit. An interesting alteration to one of the few nice cars (the other being the TR7) made by British Leyland in the 1970s.
It was a private modification and uses a Metro slam panel and light panels with a modified Capri hatch and upper hinge system and was done during the late 80's early 90's.
Bryan
Auckland NZ
1972 Morris Marina 1750 TC Coupe "Ozzy"
-
MarinaCoupe
- Posts: 10257
- Joined: Thu May 31, 2007 5:26 pm
- Location: Bedford
-
Contact:
Post
by MarinaCoupe » Wed Oct 24, 2012 7:13 am
The guy is a club member and brings it to the BMC/BL Rally at Peterborough most years. The car itself is very rough although the conversion is very good.
Last edited by
MarinaCoupe on Sun Oct 28, 2012 12:29 pm, edited 1 time in total.
-
ScreamingLordStokes
- Posts: 1130
- Joined: Thu Feb 26, 2009 6:01 pm
- Location: Socialist Republic of South Yorkshire
Post
by ScreamingLordStokes » Wed Oct 24, 2012 4:56 pm
I think the guy who owns it lives somewhere in the Yorks/Lincs area as it turns up at a few shows local to me. You're right Chris it does look rough now, and has done for a few years. I don't want to offend the guy if he's on here but I have wondered how it gets through the MOT.
-
Pont.skins
- FMM Supporter

- Posts: 1053
- Joined: Fri Jun 08, 2007 4:35 pm
- Location: Ponteland
Post
by Pont.skins » Wed Oct 24, 2012 5:42 pm
ScreamingLordStokes wrote:I think the guy who owns it lives somewhere in the Yorks/Lincs area as it turns up at a few shows local to me. You're right Chris it does look rough now, and has done for a few years. I don't want to offend the guy if he's on here but I have wondered how it gets through the MOT.
You're not the only one

Pont.Skins
-
JubileeNut
- FMM Supporter

- Posts: 5221
- Joined: Tue Jun 05, 2007 7:14 pm
- Location: Worthing, West Sussex, UK
Post
by JubileeNut » Wed Oct 24, 2012 8:12 pm
It is VERY rough, I to would not want to offend the owner at all but I think you would have to be blind not to see the problems.
I have been in one major crash in marina which was solid and I would not like to be in that one if anything went wrong

" Pru, Its Kicking off "
1973 Morris Marina TC Jubilee
2013 BMW 328i M Sport F31
-
ado28
- FMM Supporter

- Posts: 1778
- Joined: Mon Jun 04, 2007 11:48 pm
- Location: West Lothian
Post
by ado28 » Wed Oct 24, 2012 10:08 pm
Peterborough 2012
I quite liked it but it does need some tlc
Beauty with brains behind it!
-
JubileeNut
- FMM Supporter

- Posts: 5221
- Joined: Tue Jun 05, 2007 7:14 pm
- Location: Worthing, West Sussex, UK
Post
by JubileeNut » Wed Oct 24, 2012 10:54 pm
Hey Sean, that must have been the 20 minute slot it was not raining, my boy is having lunch a the back of the car and the boot is up
For some reason the Hatch back Marina had a huge teddy bear in the drivers seat most of the time it was there

" Pru, Its Kicking off "
1973 Morris Marina TC Jubilee
2013 BMW 328i M Sport F31
-
ado28
- FMM Supporter

- Posts: 1778
- Joined: Mon Jun 04, 2007 11:48 pm
- Location: West Lothian
Post
by ado28 » Wed Oct 24, 2012 11:34 pm
lol Paul, it was a quick slot before the heavens opened

Beauty with brains behind it!
-
JoshWard
- Posts: 4841
- Joined: Tue Jun 05, 2007 7:28 pm
- Location: Suffolk
-
Contact:
Post
by JoshWard » Sun Oct 28, 2012 11:28 am
Needs a bit more than TLC. The chassis is completely shot, no jacking points etc.
As Paul says, it's not just tatty but downright dangerous.
Club archivist/chief anorak
1936 Ford Model Y- On loan from the CCLP
1971 1.3 DL Coupe (VRU362J)
1971 1.8 SDL Coupe (CAE419J)
1971 1.8 SDL Saloon (JHC999J)
1971 1.3 SDL Coupe (CHY79K)
1971 1.3 SDL Coupe (JGC240K)
1971 1.3 SDL Saloon (OVW292K)
1971 1.8 SDL Coupe (MCU274K)
1980 Ital 1.3 HL (NPB34W)
-
locost_bryan
- Posts: 3096
- Joined: Fri May 22, 2009 2:43 am
- Location: Auckland, New Zealand
Post
by locost_bryan » Sun Oct 28, 2012 10:59 pm
Bryan
Auckland NZ
1972 Morris Marina 1750 TC Coupe "Ozzy"
-
JoshWard
- Posts: 4841
- Joined: Tue Jun 05, 2007 7:28 pm
- Location: Suffolk
-
Contact:
Post
by JoshWard » Sun Oct 28, 2012 11:47 pm
Not so much shot, but patch welds everywhere. Doesn't look like very pretty welding either. No front jacking point on one side and only the remains of one on the other side.
It's surprising what can pass an MOT though, especially if the rot is hidden as it was in JWC. But this is clearly on show.
Club archivist/chief anorak
1936 Ford Model Y- On loan from the CCLP
1971 1.3 DL Coupe (VRU362J)
1971 1.8 SDL Coupe (CAE419J)
1971 1.8 SDL Saloon (JHC999J)
1971 1.3 SDL Coupe (CHY79K)
1971 1.3 SDL Coupe (JGC240K)
1971 1.3 SDL Saloon (OVW292K)
1971 1.8 SDL Coupe (MCU274K)
1980 Ital 1.3 HL (NPB34W)
-
ado28
- FMM Supporter

- Posts: 1778
- Joined: Mon Jun 04, 2007 11:48 pm
- Location: West Lothian
Post
by ado28 » Mon Oct 29, 2012 12:28 am
I removed Reynards N/S/F jacking point for its MOT as it was rotten however I did weld up the hole properly and I do intend on buying a new jacking point from the MMOC when I finally rejoin and have some spare cash to spend on Reynard. At the moment money is tight and my life's fcuked up

Beauty with brains behind it!
-
JoshWard
- Posts: 4841
- Joined: Tue Jun 05, 2007 7:28 pm
- Location: Suffolk
-
Contact:
Post
by JoshWard » Mon Oct 29, 2012 9:07 am
I'm sure from what I've seen you could make up your own jacking point easily enough

Club archivist/chief anorak
1936 Ford Model Y- On loan from the CCLP
1971 1.3 DL Coupe (VRU362J)
1971 1.8 SDL Coupe (CAE419J)
1971 1.8 SDL Saloon (JHC999J)
1971 1.3 SDL Coupe (CHY79K)
1971 1.3 SDL Coupe (JGC240K)
1971 1.3 SDL Saloon (OVW292K)
1971 1.8 SDL Coupe (MCU274K)
1980 Ital 1.3 HL (NPB34W)
-
ado28
- FMM Supporter

- Posts: 1778
- Joined: Mon Jun 04, 2007 11:48 pm
- Location: West Lothian
Post
by ado28 » Mon Oct 29, 2012 5:07 pm
JoshWard wrote:I'm sure from what I've seen you could make up your own jacking point easily enough

I probably could Josh

Beauty with brains behind it!