Mod diff for 6 cyl

dazza2623 · Post by **dazza2623** » Fri Mar 29, 2013 9:09 am

Pix of disc caliper & backing plates as well as twin shock bottom plates.
A couple of pix of a 6 cyl diff.

Post by **MarinaCoupe** » Fri Mar 29, 2013 6:23 pm

dazza2623 wrote:Pix of disc caliper & backing plates as well as twin shock bottom plates.
A couple of pix of a 6 cyl diff.

What are the single pot calipers off they look meaty?

Sent from my iPhone using Tapatalk 2

dazza2623 · Post by **dazza2623** » Fri Mar 29, 2013 9:01 pm

Mitsubishi Sigma,that is what the LSD is from as well.

bigcarle · Post by **bigcarle** » Fri Mar 29, 2013 11:57 pm

verrry cool

dazza2623 · Post by **dazza2623** » Mon Apr 01, 2013 9:32 am

Removed brackets & back plate from Marina donor diff today.Here is a pic.

dazza2623 · Post by **dazza2623** » Tue Apr 02, 2013 9:14 am

Some pix of the diff with Marina back plate & sway bar mounts.
Brackets from Marina diff cleaned & waiting welding.

locost_bryan · Post by **locost_bryan** » Thu Apr 04, 2013 11:08 pm

Marina sway bar mounts? Were they from a Selby's kit, or did you make your own? Or was there a factory option?

Post by **MarinaCoupe** » Fri Apr 05, 2013 7:21 am

Hmm that's different, UK Marina sway bars mount on the top of the axle and act as an anti tramp bar as well as an anti roll bar.

Sent from my iPhone using Tapatalk 2

dazza2623 · Post by **dazza2623** » Fri Apr 05, 2013 8:24 am

No Bryan Selby did not make them,they are a genuine factory part,from a Ford Falcon

I was just playing with the UK sway bar,I am going to fabricate adjustable torque rods.Due to the car being lowered at the rear 3 1\2" I will have to restructure the seat well so they will be level to mounting point on diff.I am not worried if it feels lumpy,I won't be sitting in the back.

dazza2623 · Post by **dazza2623** » Sat Apr 06, 2013 6:53 am

Removed the v8 diff & positioned new diff for coupe in v8 to check distances.

Post by **MarinaCoupe** » Sat Apr 06, 2013 7:20 am

Double shock absorbers? Going off-roading?

Seriously - looks really good and well thought out. It's difficult to tell from the picture, what's the angle bracket for coming off the front spring mount?

Sent from my iPhone using Tapatalk 2

dazza2623 · Post by **dazza2623** » Sat Apr 06, 2013 8:49 am

Do you mean the bracket for the front of the swaybar.This is a 6 cyl rear swaybar from Proven Products & it mounts to the torque rod locators.
The rear shocks locate differently too.

dazza2623 · Post by **dazza2623** » Sat Apr 06, 2013 8:58 am

Pic of the v8 diff,6 cyl diff & new diff for coupe.You can see the differences.
Bryan should be interested in this.

Post by **MarinaCoupe** » Sat Apr 06, 2013 9:20 am

The torque rod location chassis hole is in pretty much the same place as the UK sway bar mount.

Sent from my iPhone using Tapatalk 2

dazza2623 · Post by **dazza2623** » Sat Apr 06, 2013 10:20 am

I have a UK rear bar so I will check.Interesting to see if the same.

Fast Marina Magazine

Mod diff for 6 cyl

Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl

Re: Mod diff for 6 cyl