Ben's got shiney nuts!!

billytits · Post by **billytits** » Thu Nov 15, 2007 10:59 pm

Thought you might wanna have a look at ben's new nuts

billytits · Post by **billytits** » Thu Nov 15, 2007 11:01 pm

JIM73 · Post by **JIM73** » Thu Nov 15, 2007 11:04 pm

Very shiney Trev !!

ClaytonSpeed · Post by **ClaytonSpeed** » Fri Nov 16, 2007 9:55 am

lovely!!! I look forward to fitting these! Thanks Trev!

~Sam~ · Post by **~Sam~** » Fri Nov 16, 2007 11:00 am

don't suppose you have another 16 mine are all knackered

billytits · Post by **billytits** » Fri Nov 16, 2007 10:23 pm

Sam what wheels are you running as i will need to make a drawing so that i can reproduce them accuratly

JIM73 · Post by **JIM73** » Fri Nov 16, 2007 10:25 pm

Standard TC nuts !! like the ones you were making me 2 years ago !! :roll:

billytits · Post by **billytits** » Fri Nov 16, 2007 10:35 pm

Looks like I've got a big batch to make then! Don't get gobby or you'll get nothing ginger pink thing!!

JubileeNut · Post by **JubileeNut** » Fri Nov 16, 2007 11:15 pm

Trev, are those wheel nuts stainless?
Only I need ones like those but not same as standard TC as the Jubilee has a centre cap and a flat plastic washer on the wheel nut!!

Not easy to find these ones, well so far!
Cheers,
Paul

Gee tc · Post by **Gee tc** » Sat Nov 17, 2007 10:05 am

HI ,

Paul......

If the jubilee uses Triumph centre caps, Will their nuts do?
(not that I have a clue how they look!)

Tony

JubileeNut · Post by **JubileeNut** » Sat Nov 17, 2007 3:54 pm

Hi Tony, like the avatar / picture

Spitfire or GT6 wheel nuts are the same!
they have a plastic washer on the nut to protect the centre cap

I have some spare ones I bought but they are second hand and not in great condition.
I think I can get new ones from rimmer bros but they cost lots!

Still no news on Harleys place yet! I think she must be snowed under with bits to sort or they are dragging their heels!

Hope you car is going well, mine is stripped now.
Cheers,
paul.

billytits · Post by **billytits** » Sat Nov 17, 2007 11:13 pm

hi paul
stick a pici on and i will let you know if i can sort something out and yes they are stainless i think ive got a bit of a fetish for the stuff if i can make them we will talk about cost later on but im sertainly not rimmers
cheers
Trev

JubileeNut · Post by **JubileeNut** » Sun Nov 18, 2007 11:14 am

Hi Trev,
I will get a picture up here -

This was off ebay as I have no access to my pc at mow, but this is what they look like!

billytits · Post by **billytits** » Mon Nov 19, 2007 9:57 am

hi paul
they should be no problem will need some sizes i presume the nuts are the same as a tc nut but are turned down to accomodate the plastic washer if you let me know the overall length of the nut and the diameter and length of the turned section i will make a drawing and we can go from there also is it 17mm or 19mm hex as this dose vary sometimes
cheers
Trev

billytits · Post by **billytits** » Fri Nov 23, 2007 10:37 pm

more shiney bits that are available

Fast Marina Magazine

Ben's got shiney nuts!!

Ben's got shiney nuts!!

Other shiney bits I've made